Automatic Volume Control: Service and Repair

Radio Volume Compensator Interior Noise Microphone Replacement

Removal Procedure

1. Remove the overhead console.




2. Disconnect the microphone electrical connector (3).
3. Remove the 2 retaining screws to the microphone.
4. Remove the microphone (2) from the overhead console.

Installation Procedure




1. Install the microphone (2) to the overhead console.

Notice: Refer to Fastener Notice.

2. Install the 2 microphone retaining screws.

Tighten the screws to 0.8 N.m (7 lb in).

3. Connect the microphone electrical connector (3).
4. Install the overhead console.