Tremec 5-Speed (TZ0) - Manual Transmission

Mainshaft Rear Oil Seal Replacement


Tools Required
* J 23129 Universal Seal Remover
* J 6125-1B Slide Hammer
* J 36503 Extension Housing Seal Installer



Removal Procedure





1. Remove the rear propeller shaft. Refer to One-Piece Propeller Shaft Replacement (One-Piece Propeller Shaft Replacement) or Two-Piece Propeller Shaft Replacement (Two-Piece Propeller Shaft Replacement) .
2. Remove the rear oil seal using J 6125-1B (1) and J 23129 (2).



Installation Procedure





1. Using J 36503 install the NEW rear oil seal.
2. Install the rear propeller shaft. Refer to One-Piece Propeller Shaft Replacement (One-Piece Propeller Shaft Replacement) or Two-Piece Propeller Shaft Replacement (Two-Piece Propeller Shaft Replacement) .
3. Check to transmission fluid level. Add if necessary.
4. Lower the vehicle.