Intake Air Duct: Service and Repair

Intake Air Valve Replacement

Removal Procedure




1. Remove the charge air cooler outlet pipe.
2. Disconnect the engine wiring harness electrical connector (2) from the intake air valve.




3. Remove the intake air valve bolts and valve.

Installation Procedure






Notice: Refer to Fastener Notice.

1. Position the intake air valve to the IAH and install the intake air valve bolts.

Tighten the bolts to 20 N.m (15 lb ft).




2. Connect the engine wiring harness electrical connector (2) to the intake air valve.
3. Install the charge air cooler outlet pipe.