Fuel Rail Fuel Feed Pipe Replacement - Left

Fuel Rail Fuel Feed Pipe Replacement - Left Side

Removal Procedure

1. Remove the air conditioning (A/C) compressor.
2. If equipped, remove the auxiliary generator.




3. Disconnect the fuel feed pipe fitting from the fuel injector pump.
4. Disconnect the fuel feed pipe fitting from the left fuel rail.
5. Remove the left fuel feed pipe.

Installation Procedure




1. Install the left fuel feed pipe.

Notice: Refer to Fastener Notice.

2. Connect the fuel feed pipe fitting to the left fuel rail.

Tighten the fittings to 41 N.m (30 lb ft).

3. Connect the fuel feed pipe fittings to the fuel injector pump.

Tighten the fittings to 41 N.m (30 lb ft).

4. If equipped, install the auxiliary generator.
5. Install the A/C compressor.
6. Prime the fuel system. Refer to Fuel System Priming.
7. Start the engine.
If the engine does not start, repeat the above step.
8. Inspect the fuel system for leaks.