Removal and Replacement

Throttle Body Assembly Replacement

Removal Procedure




1. Remove the air cleaner outlet resonator.
2. Disconnect the engine wiring harness electrical connector (3) from the throttle actuator (2).




3. Remove the throttle body bolts (1).
4. Remove the throttle body (2) and gasket (3). Discard the gasket.

Installation Procedure




1. Install a NEW throttle body gasket (3) into the upper intake manifold.
2. Place the throttle body (2) onto the upper intake manifold.

Notice: Refer to Fastener Notice.

3. Install the throttle body bolts (1).

Tighten the bolts to 10 N.m (89 lb in).




4. Connect the engine wiring harness electrical connector (3) to the throttle actuator (2).
5. Install the air cleaner outlet resonator.