Transmission Brace Replacement

Transmission Brace Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .




2. Remove the transaxle brace to engine oil pan bolts (2).
3. Remove the transaxle brace to transaxle bolt (1).
4. Remove the transaxle brace (3).



Installation Procedure






Notice: Refer to Fastener Notice .

1. Install the transaxle brace (3).
2. Install the transaxle brace bolts (1, 2).

Tighten the bolts to 50 N.m (37 lb ft).

3. Lower the vehicle.