Range Selector Lever Cable Replacement

Range Selector Lever Cable Replacement

Removal Procedure

1. Set the parking brake.
2. Ensure that the shift control range select lever is in the park (P) position.




3. Disconnect the shift control cable (1) from the transmission range selector lever.
4. Depress the range selector cable retainer clip tabs (2) and remove the range selector cable from the range selector cable bracket.
5. Remove the shift control lever knob. Refer to Transmission Control Lever Knob Replacement (Transmission Control Lever Knob Replacement) .
6. Remove the center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement .
7. Remove the console trim plate. Refer to Console Trim Plate Replacement .
8. Remove the right side console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .




9. Disconnect the shift control cable (1) from the shift control range select lever pin.
10. Depress the shift control cable retainer clip tabs and remove the cable (2) from the shift control.




11. Remove the shift control cable grommet from the cowl.
12. Note the shift control cable routing and remove the shift control cable from the vehicle.



Installation Procedure


Important: Ensure the shift control cable is routed exactly as originally positioned in the vehicle to avoid coming into contact with potential hazards such as hot, sharp, and moving objects.






1. Secure the shift control cable grommet by pressing the cable into the pass-thru hole in the cowl.
2. Ensure that the shift control range select lever is in the park (P) position.




3. Install the shift control cable (2) to the shift control.
4. Install the shift control cable (1) onto the shift control range select lever pin.
5. Install the right side console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .
6. Install the console trim plate. Refer to Console Trim Plate Replacement .
7. Install the center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement .
8. Install the shift control lever knob. Refer to Transmission Control Lever Knob Replacement (Transmission Control Lever Knob Replacement) .




9. Install the shift control cable (2) to the range selector cable bracket. Ensure the range selector cable retaining tabs fully engage the range selector cable bracket.
10. Connect the range selector cable (1) to the transmission range selector lever.
11. Adjust the range selector cable. Refer to Shift Control Cable Adjustment (Adjustments) .
12. Release the parking brake.