Automatic Transmission Brace Replacement (Front Wheel Drive)

Automatic Transmission Brace Replacement (Front Wheel Drive)

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right front tire and wheel.
3. Remove the right engine splash shield.




4. Remove the transaxle brace bolts.
5. Remove the transaxle brace.

Installation Procedure




1. Position the transaxle brace to transaxle and engine.
2. Hand start the bolts to the engine.
3. Hand start the bolts to the transaxle.

Notice: Refer to Fastener Notice.

4. Install the brace bolts to the engine.

Tighten the bolts to 43 N.m (32 lb ft).

5. Install the brace bolts to the transaxle.

Tighten the bolts to 43 N.m (32 lb ft).

6. Install the right engine splash shield.
7. Install the right front tire and wheel.
8. Lower the vehicle.