Fluid Pump: Service and Repair

Oil Pump Replacement

Removal Procedure

1. Remove the case side cover.





Notice: Do NOT remove the three bolts which hold the pump together.

2. Remove the oil pump bolts (205-207).




3. Remove the oil pump (200) from the valve body (300).
4. Clean and inspect the oil pump.

Installation Procedure




1. Install the oil pump (200) to valve body (300).





Notice: Refer to Fastener Notice.

2. Install the oil pump bolts (205-207).

* Tighten the M6 X 1.0 X 20 bolt to 8 N.m (70 lb in).
* Tighten the M6 X 1.0 X 85 bolt to 12 N.m (106 lb in).
* Tighten the M6 X 1.0 X 95 bolt to 16 N.m (11 lb ft).

3. Install the case side cover.