Radiator Replacement

Radiator Replacement

Removal Procedure

1. Disconnect the lower transmission oil cooler (TOC) line from the radiator.
2. Remove the cooling fans and shroud.
3. Remove radiator inlet hose.
4. Remove the radiator outlet hose.




5. Remove the bolt that secures the radiator to the condenser.
6. Remove the condenser tube clip screw.
7. Tilt the radiator and condenser inwards toward the engine and remove the radiator.

Installation Procedure




1. Install the radiator.

Notice: Refer to Fastener Notice.

2. Install the condenser tube clip screw.

Tighten the bolts to 6 N.m (53 lb in).

3. Install the bolt that secures the radiator to the condenser.

Tighten the bolt to 2.5 N.m (22 lb in).

4. Install the radiator outlet hose.
5. Install radiator inlet hose.
6. Install the cooling fans and shroud.
7. Connect the lower transmission oil cooler (TOC) line to the radiator.
8. Refill the cooling system.
9. Inspect the transmission fluid level.