Torque Converter Housing Bolt Seal Replacement

Torque Converter Housing Bolt Seal Replacement

Removal Procedure





1. Remove the torque converter from the transmission. Refer to Torque Converter Replacement.
2. Remove any of the 10 bolts (1), bolt heads shaded, where leakage at the bolt head is suspected.

3. Important:
Bolts (1) have a removable seal under the flanged head.

Remove and discard seals from bolts removed.

Installation Procedure





1. Install new seals on any bolts (1) removed.

2. Notice:
Refer to Fastener Notice in Service Precautions.

Install any bolts (1) removed.

Tighten bolts to 56 Nm (41 ft. lbs.).

3. Install the torque converter into the transmission. Refer to Torque Converter Replacement.