Roof Rail Rear Assist Handle Replacement

Roof Rail Rear Assist Handle Replacement

Removal Procedure





1. Remove center pillar trim panel. Refer to Center Pillar Garnish Molding Replacement .
2. Remove the assist handle retraining screws.
3. Remove the assist handle from the vehicle.



Installation Procedure





1. Install the assist handle to the vehicle.

Notice: Refer to Fastener Notice .

2. Install the assist handle screws.

Tighten the screws to 6 N.m (53 lb in).

3. Install the center pillar trim panel. Refer to Center Pillar Garnish Molding Replacement .