70. Valve Lifter Installation

Valve Lifter Installation





1. Important:
^ If a new camshaft is installed, replace all valve lifters.
^ If using the valve lifters again, install in their original location. The valve lifter guide retainer must contact all valve lifter guides. If the valve lifter guide retainer is bent, the valve lifter guide retainer must be replaced.

Apply clean engine oil to the valve lifter rollers.
2. Install the valve lifters.
3. Install the valve lifter guides over the flats on the valve lifters. Ensure the rollers of the valve lifters are properly aligned with the camshaft lobes.





4. Install the valve lifter guide retainer.

5. Notice: Refer to Fastener Notice in Service Precautions.

Install the valve lifter guide retainer bolts.
Tighten the valve lifter guide retainer bolts to 25 Nm (18 ft. lbs.).