4L60-E / 4L65-E / 4L70-E Automatic Transmission
DTC P071A
Circuit Description
Tow/haul mode enables the operator to achieve enhanced shift performance when towing or hauling a load. When tow/haul mode is selected, the tow/haul switch input signal to the body control module (BCM) is momentarily toggled to zero volts. This signals the transmission control module (TCM) to extend the length of time between upshifts and increase transmission line pressure. Cycling the tow/haul switch again disables tow/haul mode and returns the transmission to a normal shift pattern.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC P071A Transmission Tow Mode Switch Circuit
Conditions for Running the DTC
* No Transmission Mode Switch Signal DTC P1762.
* The engine speed is greater than 500 RPM for 5 seconds.
* The system voltage is 10-18 volts.
Conditions for Setting the DTC
The Tow Mode switch remains closed, low voltage, for 600 seconds.
Action Taken When the DTC Sets
* The TCM does not illuminate the malfunction indicator lamp (MIL).
* The TCM records the operating conditions when the Conditions for Setting the DTC are met. The TCM stores this information as Failure Records.
* The TCM stores DTC P071A in TCM history.
Conditions for Clearing the MIL/DTC
* A scan tool can clear the DTC.
* The TCM clears the DTC from TCM history if the vehicle completes 40 warm-up cycles without an emission-related diagnostic fault occurring.
* The TCM cancels the DTC default actions when the fault no longer exists and the DTC passes.
Diagnostic Aids
If the electrical circuit tests are OK and the tow/haul shift pattern is not occurring, there may be a mechanical/hydraulic condition that prevents tow/haul operation. Refer to Symptoms - Automatic Transmission. - Symptoms - Automatic Transmission
Test Description
The numbers below refer to the step numbers on the diagnostic table.
2. This step tests for a faulty tow/haul switch.
3. This step tests for voltage input from the BCM to the tow/haul switch.
6. This step tests for ground integrity.
