Antilock Brakes / Traction Control Systems

DTC C0569

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview
* Review Strategy Based Diagnosis for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions provides an overview of each diagnostic category.

DTC Descriptor
DTC C0569 00
- System Configuration Error

Diagnostic Fault Information





Circuit/System Description

The electronic brake control module (EBCM) is the control center for the ABS TCS/ESP. The programming and calibration needed by the EBCM to control the operation of the ABS TCS/ESP are stored in the EBCMs read only memory (ROM). The EBCM constantly performs a self test that detects, and isolates ABS TCS/ESP faults.

Conditions for Running the DTC

The ignition is ON.

Conditions for Setting the DTC

The EBCM has not undergone the programming procedure.

Action Taken When the DTC Sets

The driver information center (DIC) displays the SERVICE Antilock Brake System (ABS) warning message.

Conditions for Clearing the DTC

A current DTC will clear when the EBCM has undergone the setup procedure.

Diagnostic Aids

A newly replaced EBCM will set DTC C0569 on its initial ignition ON cycle.


Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests