Glow Plug Replacement - Bank 1

Glow Plug Replacement - Bank 1

Removal Procedure




1. Disconnect the negative battery cable.
2. Remove the right wheelhouse panel.
3. Remove the engine wiring harness nut(s) from the glow plug(s).
4. Remove the engine wiring harness lead(s) from the glow plug(s).
5. Remove the glow plug(s) from the cylinder head.

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the glow plug(s) to the cylinder head.

Tighten the plug to 18 N.m (13 lb ft).

2. Install the engine wiring harness lead(s) to the glow plug(s).
3. Install the engine wiring harness nut(s) to the glow plug(s).

Tighten the nut to 1.7 N.m (15 lb in).

4. Install the right wheelhouse panel.
5. Connect the negative battery cable.