Intake Air Valve Replacement

Intake Air Valve Replacement

Removal Procedure




1. Remove the air cleaner assembly.
2. Remove the charge air cooler outlet pipe.
3. Disconnect the engine wiring harness electrical connector (2) from the intake air valve.




4. Remove the upper intake manifold brace bolts and brace.




5. Remove the intake air valve bolts (1), nuts (2) and valve.

Installation Procedure






Notice: Refer to Fastener Notice.

1. Position the intake air valve to the intake pipe and install the intake air valve bolts (1) and nuts (2).

Tighten the bolts to 20 N.m (15 lb ft).




2. Install the upper intake manifold brace and bolts.

Tighten the bolts to 24 N.m (18 lb ft).




3. Connect the engine wiring harness electrical connector (2) to the intake air valve.
4. Install the charge air cooler outlet pipe.
5. Install the air cleaner assembly.