Exhaust Pipe Replacement - Left Side

Exhaust Pipe Replacement - Left Side (6.6L)

Removal Procedure




1. Remove the transmission.
2. Remove the exhaust heat shield nuts (2) and heat shield (3) from the dash panel.




3. Remove the exhaust pipe heat shield bolts and shield.




4. Remove the exhaust pipe bolts in the sequence shown.




5. Remove the exhaust pipe and gaskets. Discard the gaskets.

Installation Procedure




1. Position the exhaust pipe with a NEW gasket to the turbocharger.
2. Loosely install the exhaust pipe to turbocharger bolts.
3. Position the exhaust pipe with a NEW gasket to the exhaust manifold. Align the tabs on the gasket to face downward.
4. Loosely install the exhaust pipe to exhaust manifold bolts.





Notice: Refer to Fastener Notice.

5. Tighten the exhaust pipe bolts in the sequence shown.

Tighten the bolts to 53 N.m (39 lb ft).




6. Install the exhaust pipe heat shield bolts.

Tighten the bolts to 10 N.m (89 lb in).




7. Install the left side exhaust heat shield (3) at the dash panel.
8. Install the heat shield nuts (2).

Tighten the nuts to 9 N.m (80 lb in).

9. Install the transmission.