Auxiliary Battery Positive Cable Replacement

Battery Positive Cable Replacement (Auxiliary 6.6L)

Removal Procedure

Caution: Refer to Battery Disconnect Caution.





1. Disconnect the auxiliary battery negative cable.





2. Disconnect the auxiliary positive battery cable.





3. Remove the auxiliary positive battery cable to the frame clips (1).
4. Remove the auxiliary positive battery cable to chassis harness clips (2).





5. Remove the auxiliary positive battery cable to frame clips (1).
6. Remove the auxiliary positive battery cable to crossmember clips (2).
7. Remove the auxiliary positive battery cable to engine harness clips (3).





8. Remove the auxiliary positive battery cable nut from the junction block.
9. Disconnect the auxiliary positive battery cable wiring harness clips.
10. Remove the auxiliary positive battery cable.

Installation Procedure

1. Position the auxiliary positive battery cable and connect the wiring harness clips.






Notice: Refer to Fastener Notice.

2. Position the auxiliary positive battery cable to the junction block and install the cable nut.

Tighten the auxiliary positive cable nut to 8 N.m (71 lb in).





3. Install the auxiliary positive battery cable to engine harness clips (3).
4. Install the auxiliary positive battery cable to crossmember clips (2).
5. Install the auxiliary positive battery cable to frame clips (1).





6. Install the auxiliary positive battery cable to the chassis harness clips (2).
7. Install the auxiliary positive battery cable to the frame clips (1).





8. Connect the auxiliary positive battery cable to the auxiliary battery.

Tighten the auxiliary positive cable bolt to 17 N.m (13 lb ft).

9. Connect the auxiliary negative battery cable.