Radiator Inlet Hose Replacement

Radiator Inlet Hose Replacement (Chevrolet)

Removal Procedure




1. Drain the coolant.
2. Remove the upper fascia retainers from the radiator support.
3. Remove the upper radiator bracket bolt from the radiator support.
4. Remove the upper radiator bracket from the radiator.
5. Remove the radiator inlet hose clamp from the radiator.




6. Remove the radiator inlet hose from the radiator.




7. Remove the radiator inlet hose clamp from the engine.
8. Remove the radiator inlet hose from the engine.

Installation Procedure




1. Install the radiator inlet hose to the engine.
2. Install the radiator inlet hose clamp to the engine.




3. Install the radiator inlet hose to the radiator.




4. Install the radiator inlet hose clamp to the radiator.
5. Install the upper radiator bracket to the radiator.

Notice: Refer to Fastener Notice .

6. Install the upper radiator bracket bolt to the radiator support.

Tighten the bolt to 20 N.m (15 lb ft).

7. Install the upper fascia retainers to the radiator support.
8. Fill the cooling system.