Washer Pump Replacement - Rear

WASHER PUMP REPLACEMENT - REAR

REMOVAL PROCEDURE
1. Remove the washer solvent from the washer solvent container.




2. Disconnect the rear washer pump electrical connector.
3. Disconnect the rear washer pump hose.




4. Using a small flat-bladed tool, remove the rear washer pump from the washer solvent container.
5. Using a small flat-bladed tool, remove the seal from the washer solvent container.

INSTALLATION PROCEDURE




1. Position the seal to the washer solvent container, pressing in until fully seated.
2. Position the rear washer pump to the washer solvent container, pressing in until fully seated.




3. Connect the rear washer pump hose.
4. Connect the rear washer pump electrical connector.
5. Fill the washer solvent container with washer solvent.