Blower Motor Relay: Service and Repair

BLOWER MOTOR RELAY REPLACEMENT - AUXILIARY

REMOVAL PROCEDURE
1. Remove the left lower quarter trim panel.
2. Disconnect blower motor relay electrical connector.
3. Remove the blower motor relay bolts/screws.
4. Remove the blower motor relay.

INSTALLATION PROCEDURE
1. Install the blower motor relay.
2. Connect the blower motor relay electrical connector.
3. Install the blower motor relay bolts/screws.

NOTE: Refer to Fastener Notice in Service Precautions.

The bolts/screws to 1.6 N.m (14 lb in).

4. Install the left lower quarter trim panel.