Garnish Molding Replacement - Rear Upper (Tahoe/Yukon/Escalade/Suburban)

Garnish Molding Replacement - Rear Upper (Tahoe/Yukon/Escalade/Suburban)

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure




1. Use the J 38778 in order to remove the rear upper garnish molding.
Insert the J 38778 and work along the front edge of the trim panel from one end to the other.
2. Remove the rear upper garnish molding from the vehicle.

Installation Procedure





Install the roof rear upper garnish molding to the vehicle until it clicks into place.