Clutch Pedal Position Sensor / Switch: Service and Repair

Clutch Pedal Position Switch Replacement

Removal Procedure





1. Remove the left knee bolster mounting bracket.
2. Disconnect the clutch pedal position switch electrical connector.
3. Push the clutch position switch retaining plate locking tabs (2) toward each other.





4. Slide the retaining plate (1) past the locking tabs.
5. Remove the retaining plate (1) from the clutch pedal position switch (2).
6. Remove the clutch pedal position switch (2) from the clutch master cylinder push rod (3).

Installation Procedure





1. Install the clutch pedal position switch (2) to the clutch master cylinder push rod (3).
2. Install the retaining plate (1) to the clutch pedal position switch (2).





3. Slide the retaining plate into the locked position until the retaining tabs (1) and the locking tabs (2) are fully engaged.
4. Connect the clutch pedal position switch electrical connector.
5. Remove the left knee bolster mounting bracket.