Turn Signal Bulb: Service and Repair

PARK/TURN SIGNAL LAMP BULB REPLACEMENT

REMOVAL PROCEDURE
1. Open the hood.
2. Remove the upper grille applique molding.
3. Remove the park/turn signal lamp from the vehicle.




4. Remove the electrical connector from the park/turn signal lamp by rotating the connector counterclockwise.




5. Pull bulb out of electrical connector.

INSTALLATION PROCEDURE




1. Install the bulb to the electrical connector by pressing until fully seated.




2. Install the electrical connector into the park/turn signal housing and turn the connector clockwise.
3. Install the park/turn signal lamp to the vehicle.
4. Install the upper grille applique molding.
5. Close the hood.