2. Holding Fixture Installation

Holding Fixture Installation

^ Tools Required
- J 3289-20 Holding Fixture
- J 45159 Holding Fixture





1. Install the body of the J 45159 with the two long bolts (1) to the transaxle.
2. Loosely install the arm and bolt (2) to the J 45159 body.

Notice:
Refer to Fastener Notice in Service Precautions.

3. Install the arm with the provided shorter bolt (3) to the transaxle.
Tighten the J 45159 to 25 Nm (18 lb ft) starting with bolt (3).
4. Install the J 45159 in the J 3289-20.