Lower Control Arm Bushings Replacement (Rear)

Lower Control Arm Bushings Replacement (Rear)

Removal Procedure
1. Raise and support the vehicle.
2. Remove the front tire and wheel assembly.
3. Remove the lower control arm.





4. Remove the rear bushing nut.
5. Remove the rear bushing.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the rear bushing to the lower control arm.
^ Tighten the nut to 150 Nm (11 ft. lbs.).
2. Install the lower control arm.
3. Install the front tire and wheel assembly.
4. Lower the vehicle.