Garnish Molding Replacement - Rear Corner

Garnish Molding Replacement - Rear Corner

Removal Procedure





1. Remove the rear door sill. Refer to Door Sill Plate Replacement - Liftgate (Service and Repair) .




2. Remove the cargo hook from the rear quarter trim.




3. Remove the push pins from the rear quarter trim.




4. Pull the quarter trim away from the rear corner garnish molding.




5. Pull the corner garnish molding to release.
6. Remove the corner molding from the vehicle.



Installation Procedure





1. Push the rear corner garnish molding until the fasteners are seated.




2. Push the quarter trim until the fasteners are seated.




3. Install the push pins to the quarter trim.





Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the cargo hooks.

Tighten the cargo hooks to 25 N.m (18 lb ft).





5. Install the rear sill plate. Refer to Door Sill Plate Replacement - Liftgate (Service and Repair) .
6. Close the liftgate.