Garnish Molding Replacement - Lock Pillar Upper

GARNISH MOLDING REPLACEMENT - LOCK PILLAR UPPER

REMOVAL PROCEDURE




1. Remove the rear quarter trim.
2. Open the shoulder belt guide loop cover.
3. Remove the shoulder belt guide and fastener.




4. Remove the lock pillar upper garnish molding from the vehicle.

INSTALLATION PROCEDURE




1. Align and push to seat the garnish molding.




2. Install the shoulder belt guide loop to the lock pillar.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the shoulder belt guide loop bolt to 50 N.m (37 lb ft).
3. Install the rear quarter panel.