Cup Holder Replacement - Front Floor Console - Front

CUP HOLDER REPLACEMENT - FRONT FLOOR CONSOLE - FRONT

REMOVAL PROCEDURE




1. Open the arm rest on the console.
2. Remove the cupholder cover.
3. Remove the screws from the cup holder track.
4. Remove the cup holder and the track from the console.




5. Pull to separate the cup holder from the track.

INSTALLATION PROCEDURE




1. Install the cup holder to the track.
2. Position the track in the console assembly.
3. Install the console track screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screw to 2.5 N.m (22 lb in).
4. Snap the cupholder cover in place.
5. Inspect the cupholder for correct operation.