Fuel Hose/Pipes Assembly Replacement (Front)

FUEL HOSE/PIPES ASSEMBLY REPLACEMENT (FRONT)

REMOVAL PROCEDURE

IMPORTANT: Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to avoid possible fuel and/or EVAP system contamination.




1. Remove the fuel tank.
2. Disconnect and remove the fuel feed line (4) from the module and retaining clips.
3. Disconnect and remove the rear fuel feed line (2) from the module and retaining clips.
4. Cap the fuel feed and EVAP openings in order to prevent possible fuel/EVAP system contamination.

INSTALLATION PROCEDURE




1. Remove the caps from the fuel feed and EVAP lines.
2. Install and connect the rear fuel feed line (2) to the module and retaining clips.
3. Install and connect the fuel feed (4) line to the module and retaining clips.
4. Install the fuel tank.