Wiper Motor Cover Replacement - Front

WIPER MOTOR COVER REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Remove the wiper motor.
2. Remove the wiper motor cover screws.
3. Remove the wiper motor cover from the wiper motor.

INSTALLATION PROCEDURE




1. Position the wiper motor cover to the wiper motor.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the wiper motor cover screws.

Tighten the screws to 2 N.m (18 lb in).

3. Install the wiper motor.
4. Inspect the wipers for proper operation.