Fluid Pump: Service and Repair

Oil Pump Replacement

Removal Procedure
1. Remove the case side cover.





Notice: Do NOT remove the three bolts which hold the pump together.

2. Remove the oil pump bolts (205-207).





3. Remove the oil pump (200) from the valve body (300).
4. Clean and inspect the oil pump.

Installation Procedure





1. Install the oil pump (200) to valve body (300).





Notice: Refer to Fastener Notice in Service Precautions.

2. Install the oil pump bolts (205-207).
^ Tighten the M6 X 1.0 X 20 bolt to 8 Nm (70 lb in).
^ Tighten the M6 X 1.0 X 85 bolt to 12 Nm (106 lb in).
^ Tighten the M6 X 1.0 X 95 bolt to 16 Nm (11 lb ft).
3. Install the case side cover.