Fog/Driving Lamp Bulb: Service and Repair

FOG LAMP BULB REPLACEMENT - FRONT

REMOVAL PROCEDURE

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.

1. Partially remove the front fender liner to gain access to the fog lamp assembly.




2. Remove the fog lamp bulb/socket from the fog lamp by rotating counterclockwise.




3. Disconnect the electrical connector from the fog lamp bulb/socket.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the fog lamp bulb/socket.
2. Install the fog lamp bulb/socket to the fog lamp rotating clockwise until fully seated.
3. Install the front fender liner.