Exhaust Manifold Replacement - Left
Exhaust Manifold Replacement - LeftRemoval Procedure
1. Remove the throttle body air inlet duct.
2. Drain the engine coolant from the cooling system.
3. Remove the right engine mount strut bracket.
4. Disconnect the inlet radiator hose from the engine.
5. Remove the thermostat bypass pipe.
6. Remove the exhaust crossover pipe bolts from the engine left side exhaust manifold.
7. Remove the exhaust manifold heat shield bolts.
8. Remove the exhaust manifold heat shield.
9. Remove the exhaust manifold nuts.
10. Remove the exhaust manifold.
11. Remove the exhaust manifold gasket.
12. Clean the engine left side exhaust manifold to the engine left side cylinder head sealing surfaces.
Installation Procedure
1. Install the exhaust manifold gasket.
2. Install the exhaust manifold.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the exhaust manifold nuts.
Tighten the exhaust manifold nuts to 16 Nm (12 ft. lbs.).
4. Install the exhaust manifold heat shield.
5. Install the exhaust manifold heat shield bolts.
Tighten the exhaust manifold heat shield bolts to 10 Nm (89 inch lbs.).
6. Install the exhaust crossover pipe.
7. Install the thermostat bypass pipe.
8. Connect the inlet radiator hose to the engine.
9. Install the right engine mount strut bracket.
10. Fill the cooling system with engine coolant.
11. Install the throttle body air inlet duct.