Lower Sliding Door Roller: Service and Repair

Roller Bracket Replacement - Lower

Removal Procedure

1. Remove the front edges of the sliding door inner trim panel in order to gain access to the sliding door lower roller bracket bolts.
2. Mark the location of the sliding door lower roller bracket to the sliding door with a grease pencil.
3. Support the sliding door.




4. Remove the sliding door catch with the reinforcement channel bolt at the sliding door lower track.




5. Remove the sliding door lower roller bracket bolts.
6. Remove the sliding door lower roller bracket from the lower track.



Installation Procedure





1. Install the sliding door lower roller bracket to the lower track.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the sliding door catch with reinforcement channel bolt at the sliding door lower track.

Tighten the reinforcement channel bolt to 12 N.m (106 lb in).





3. Align the sliding door lower roller bracket to the grease pencil marks on the sliding door.
4. Install the sliding door lower roller bracket bolts.

Tighten the lower roller bracket bolts to 25 N.m (18 lb ft).

5. Remove the support from the sliding door.
6. Install the front edge of the sliding door inner trim panel to the sliding door.