Procedures

LOCK ACTUATOR REPLACEMENT - FRONT DOOR

REMOVAL PROCEDURE
1. Remove the front door module.
2. Disconnect the front door lock actuator electrical connectors.




3. Remove the front door outside handle lock rod bracket.




4. Remove the front door lock actuator screws.
5. Remove the front door lock actuator from the front door lock.

INSTALLATION PROCEDURE




1. position the front door lock actuator to the front door lock.
2. Install the front door lock actuator screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).




3. Install the front door outside handle lock rod bracket.
4. Connect the front door lock actuator electrical connectors.
5. Install the front door module.