Radiator Hose Replacement - Outlet

Radiator Hose Replacement - Outlet

^ Tools Required
- J 38185Hose Clamp Pliers

Removal Procedure
1. Drain the cooling system.
2. Remove the air cleaner assembly.
3. Disengage the tension on the radiator outlet hose clamp at the thermostat housing using the J 38185.





4. Disconnect the radiator outlet hose (2) from the thermostat housing.
5. Raise and support the vehicle. Refer to Vehicle Lifting.
6. Disengage tension on the radiator outlet hose clamp at the radiator using J 38185.
7. Disconnect the radiator outlet hose (2) from the radiator.
8. Remove the radiator outlet hose (2).

Installation Procedure

1. Notice: Make sure the reference marks on the hoses and the radiator are lined up. A twist on the hose would place strain on the radiator fitting which could cause the fitting to crack or break.

Important: Lubricate the inside diameters of the hose with clean coolant prior to installation.

Install the radiator outlet hose (2).





2. Connect the radiator outlet hose (2) to the radiator.
3. Engage tension on the radiator outlet hose clamp at the radiator.
4. Lower the vehicle.
5. Connect the radiator outlet hose to the thermostat housing.
6. Engage tension on the radiator outlet hose clamp at the thermostat housing.
7. Install the air cleaner assembly.
8. Fill the cooling system.