Fuel Pressure Test Port: Service and Repair

FUEL PRESSURE CONNECTION VALVE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the engine cover.




2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
3. Use a standard valve core tool in order to remove the valve core (2).

INSTALLATION PROCEDURE




1. Use a standard valve core tool in order to install a new valve core (2).
2. Tighten the fuel filler cap.
3. Connect the negative battery cable.
4. Inspect for leaks.
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition for 2 seconds.
4. Inspect for fuel leaks.
5. Install the fuel pressure connection valve cap (3).
6. Install the engine cover.