113. Drain Plug Installation

Drain Plug Installation





1. Install a new gasket (820) on the drain plug (819).

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the drain plug (819) into the case assembly (17).
^ Tighten the drain plug to 39 Nm (29 ft. lbs.).





3. Install the vent hose assembly.





4. Install a new O-ring (824) on the transmission fluid level indicator and lubricate with transmission fluid.
5. Install the transmission fluid level indicator.

6. Notice: Refer to Fastener Notice in Service Precautions.

Install the transmission fluid level indicator bolt.
^ Tighten the indicator bolt to 10 Nm (89 inch lbs.).