Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement

TAIL LAMP ASSEMBLY AND /OR BACKUP, SIDEMARKER, STOP, TURN SIGNAL BULB REPLACEMENT

REMOVAL PROCEDURE




1. Remove the tail lamp bolt covers.




2. Remove the tail lamp bolts (3).




3. Pull outward at the front of the tail lamp assembly to disengage the retainers from the body side.
4. Remove the bulbs from the tail lamp assembly.
5. Remove the tail lamp assembly from the vehicle.

INSTALLATION PROCEDURE




1. Position the tail lamp assembly to the vehicle.
2. Install the bulbs into the tail lamp assembly.
3. Push inward at the front of the tail lamp assembly to engage the retainers into the body side.




4. Install the tail lamp bolts (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the tail lamp bolts to 2 N.m (18 lb in).

5. Install the tail lamp bolt covers (4).