Weatherstrip Replacement-Midgate-Upper

The content of this article/image reflects the changes identified in TSB


Bulletin No.: 06-08-66-006

Date: March 31, 2006

SERVICE MANUAL UPDATE

Subject:
Revised Weatherstrip Replacement - Midgate - Upper

Models:
2002-2006 Cadillac Escalade EXT
2002-2006 Chevrolet Avalanche

Weatherstrip Replacement - Midgate - Upper

Removal Procedure






1. Fold down the rear seat.

2. Remove the rear removable glass panel.

3. Remove the midgate.

4. Remove the cargo stowage box. Refer to Box Replacement - Cargo Stowage.






5. Starting from one end remove the weatherstrip from the vehicle.



Installation Procedure

Important:
To begin the installation of the weatherstrip, ensure the weatherstrip is at a minimum of 21°C (70°F).

1. Starting from one end of the weatherstrip, install the weatherstrip.

2. Ensure the corners of the weatherstrip are fully seated.

3. Install the cargo stowage box. Refer to Box Replacement - Cargo Stowage

4. Install the midgate.

5. Close the midgate.

6. Install the rear removable rear glass panel.

7. Inspect the weatherstrip when the midgate is closed and the glass panel installed.

8. Set the rear seat in the upright position.