Transfer Case Output Shaft Seal Replacement - Front

Transfer Case Output Shaft Seal Replacement - Front
^ Tools Required
- J 44636-1 Front Output Shaft Seal Installer
- J 44636-2 Front Output Shaft Seal Protector

Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transfer case shield.
3. Remove the front propeller shaft.
4. Remove the transfer case front output shaft dust seal.





5. Remove the transfer case front output shaft seal.

Installation Procedure





1. Install the J 44636-2 on the transfer case front output shaft.





2. Install the transfer case front output shaft seal on the J 44636-2.





3. Using the J 44636-1, install the transfer case front output shaft seal.
4. Remove the J 44636-1 from the transfer case front output shaft.





5. Remove the J 44636-2 from the transfer case front output shaft.





6. Install the transfer case front output shaft dust seal.
7. Install the front propeller shaft.
8. Check the transfer case fluid level.
9. Install the transfer case shield.
10. Lower the vehicle. Refer to Vehicle Lifting.