Seat Belt Retractor Reinforcement Replacement - Left

REMOVAL PROCEDURE




1. Remove the cover from the rear seat shoulder belt anchor.
2. Remove the bolt retaining the rear seat shoulder belt anchor to the bracket.
3. Remove the rear seat shoulder belt bracket cover.
4. Remove the nut retaining the rear seat shoulder belt bracket to the reinforcement.




5. Remove the headliner.
6. Remove the nuts retaining the rear seat shoulder belt reinforcement to the roof.
7. Remove the bolts retaining the rear seat shoulder belt reinforcement to the roof.
8. Remove the rear seat shoulder belt reinforcement from the roof.

INSTALLATION PROCEDURE




1. Install the rear seat shoulder belt reinforcement to the roof.
2. Install the bolts to retain the rear seat shoulder belt reinforcement to the roof.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the rear seat shoulder belt reinforcement bolts to 35 N.m (26 lb ft).

3. Install the nuts to retain the rear seat shoulder belt reinforcement to the roof.

Tighten
Tighten the rear seat shoulder belt reinforcement to the roof nuts to 35 N.m (26 lb ft).

4. Install the headliner.




5. Install the nut to retain the rear seat shoulder belt bracket to the reinforcement.

Tighten
Tighten the rear seat shoulder belt bracket to the reinforcement nut to 35 N.m (26 lb ft).

6. Install the rear seat shoulder belt bracket cover.
7. Install the bolt to retain the rear seat shoulder belt to the bracket.

Tighten
Tighten the rear seat shoulder belt to the bracket bolt to 30 N.m (22 lb ft).

8. Install the cover to the rear seat shoulder belt.