Seat Cushion Cover and Pad Replacement - Rear

SEAT CUSHION COVER AND PAD REPLACEMENT - REAR

REMOVAL PROCEDURE
1. Remove the bench seat and risers from the vehicle.
2. Remove the right and left sides of the seat back hinge trim.




3. Remove the bolts retaining the seat back hinges to the seat cushion frame.

IMPORTANT: Note the position and length of the bolts you remove. This will assist with reassembly.




4. Remove the J-hooks that retain the seat cushion cover to the seat cushion frame.




5. Remove the hog rings that retain the seat cushion cover to the seat cushion frame located at the rear edge of the seat frame.

IMPORTANT: Note the locations of the hog rings for reassembly.




6. Remove the seat back cushion cover and pad from the seat cushion frame.




7. Remove the hog rings that retain the seat cushion cover to the seat cushion pad located under the seat cushion cover.

IMPORTANT: Note the locations of the hog rings for reassembly.

8. Remove the seat cushion cover from the seat cushion pad.

INSTALLATION PROCEDURE
1. Install the seat cushion cover to the seat cushion pad.




2. Install the hog rings that retain the seat cushion cover to the seat cushion pad located under the seat cushion cover.




3. Install the seat back cushion cover and pad to the seat cushion frame.




4. Install the hog rings that retain the seat cushion cover to the seat cushion frame located at the rear edge of the seat frame.




5. Install the J-hooks that retain the seat cushion cover to the seat cushion frame.




6. Install the bolts that retain the seat back hinges to the seat cushion frame.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts that retain the seat back hinges to the seat cushion frame to 30 Nm (22 lb ft).

7. Install the right and left sides of the seat back hinge trim.
8. Install the bench seat and risers in the vehicle.