Sliding Door Handle: Service and Repair

Door Handle Replacement - Outside Sliding

Removal Procedure

1. Remove the trim panel. Refer to Trim Panel Replacement - Door (Service and Repair) .
2. Remove the water deflector. Refer to Water Deflector Replacement - Sliding Door (Water Deflector Replacement - Sliding Door) .
3. Remove the lock control. Refer to Lock Replacement - Sliding Door (Lock Replacement - Sliding Door) .
4. Remove the lock rods from the handle (1).
5. Remove the outside handle nuts (2).




6. Remove the outside handle and gasket from the door.



Installation Procedure





1. Install the outside handle and gasket to the door.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the outside handle nuts (2).

Tighten the outside handle nuts to 6 N.m (50 lb in).

3. Install the lock rods to the handle (1).
4. Install the lock control. Refer to Lock Replacement - Sliding Door (Lock Replacement - Sliding Door) .
5. Install the water deflector. Refer to Water Deflector Replacement - Sliding Door (Water Deflector Replacement - Sliding Door) .
6. Install the trim panel. Refer to Trim Panel Replacement - Door (Service and Repair) .