Handle Replacement - Rear Door Inside

Handle Replacement - Rear Door Inside

Removal Procedure

1. Remove the trim panel. Refer to Trim Panel Replacement - Rear Door (Cargo Doors) (Trim Panel Replacement - Rear Door (Cargo Doors))Trim Panel Replacement - Rear Door (E54) (Trim Panel Replacement - Rear Door (E54)) .
2. Remove the water deflector. Refer to Water Deflector Replacement (Service and Repair) .




3. Remove the control rod (1) from the door lock.
4. Remove the door handle nuts (2).




5. Remove the door handle from the door.



Installation Procedure





1. Install the door handle to the door.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the door handle nuts (2).

Tighten the nuts to 11 N.m (97 lb in).


Important: Install new control rod retainers whenever they are removed.


3. Install the control rod to the door handle (1).
4. Install the water deflector. Refer to Water Deflector Replacement (Service and Repair) .
5. Install the door trim panel. Refer to Trim Panel Replacement - Rear Door (Cargo Doors) (Trim Panel Replacement - Rear Door (Cargo Doors))Trim Panel Replacement - Rear Door (E54) (Trim Panel Replacement - Rear Door (E54)) .