Wiring Harness Replacement - Sliding Door

Wiring Harness Replacement - Sliding Door

Removal Procedure

1. Remove the trim panel. Refer to Trim Panel Replacement - Door (Service and Repair) .
2. Remove the water deflector. Refer to Water Deflector Replacement - Sliding Door (Water Deflector Replacement - Sliding Door) .
3. Remove the upper access cover (cargo van). Refer to Access Cover Replacement - Cargo Van Upper (Access Cover Replacement - Cargo Van Upper) .
4. Disconnect the electrical connector (5) from the lock assembly.
5. Disconnect the electrical connectors (2) from the contact switch.
6. Remove the harness clips from the door (4).




7. Remove the wiring harness from the door (3).



Installation Procedure





1. Install the wiring harness to the door (3).
2. Install the harness clips to the door (4).
3. Connect the electrical connectors to the contact switch (2).
4. Connect the electrical connector (5) to the lock assembly.
5. Install the upper access cover (cargo van). Refer to Access Cover Replacement - Cargo Van Upper (Access Cover Replacement - Cargo Van Upper) .
6. Install the water deflector. Refer to Water Deflector Replacement - Sliding Door (Water Deflector Replacement - Sliding Door) .
7. Install the trim panel Trim Panel Replacement - Sliding Door (Service and Repair) .