Blower Motor Switch: Service and Repair
FRONT AUXILIARY BLOWER MOTOR SWITCH REPLACEMENTREMOVAL PROCEDURE
1. Remove the I/P trim plate.
2. Remove the auxiliary blower motor switch retaining screws.
3. Pull straight out from the I/P in order to remove the auxiliary blower motor switch.
4. Disconnect the electrical connectors from the blower motor switch.
INSTALLATION PROCEDURE
1. Connect the electrical connectors to the blower motor switch.
2. Push in on the blower motor switch in order to install the blower motor switch.
3. Install the auxiliary blower motor switch retaining screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Vehicle Damage Warnings
Tighten
Tighten the screws to.....2.5 N.m (22 lb in).
4. Install the I/P trim plate.