Heater Cord

Coolant Heater Cord Replacement

Removal Procedure





1. Turn the ignition OFF.

Important: The strap that secures the coolant heater cord to the diagonal brace is reusable. Do NOT cut this strap in order to remove it.

2. Press the coolant heater strap retainer tab in Order to remove coolant heater cord strap.
3. Use wire cutters in order to remove the coolant heater cord upper straps from the engine wiring harness.
4. Raise and support the vehicle. Refer to Vehicle Lifting.





5. Use wire cutters in order to remove the 3 coolant heater cord lower straps (1) from the engine wiring harness.
6. Remove the right front wheel.
7. Remove the right engine splash shield.





8. Remove the engine coolant heater cord from the engine coolant heater.
9. Remove the engine coolant heater cord.

Installation Procedure





1. Install the engine coolant heater cord to the engine coolant heater.
2. Properly route the coolant heater cord.





3. Use 3 new tie straps (1) in order to secure the coolant heater cord to the engine lower wiring harness.
4. Install the right engine splash shield.
5. Install the right front wheel.
6. Lower the vehicle.
7. Use 2 new tie straps in order to secure the coolant heater cord to the engine upper wiring harness.





8. Use the reusable strap in order to secure the coolant heater cord to the diagonal brace.